home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
LiquidLibrary 2005 February
/
LiquidLibrary 2005 February - Disc 1.iso
/
pc
/
Portfolio Browser
/
Filters
/
PDF
/
LIB
/
gs_lev2.ps
< prev
next >
Wrap
Text File
|
2003-01-03
|
29KB
|
855 lines
% Copyright (C) 1990, 2000 Aladdin Enterprises. All rights reserved.
%
% This software is licensed to a single customer by Artifex Software Inc.
% under the terms of a specific OEM agreement.
% $RCSfile$ $Revision$
% Initialization file for Level 2 functions.
% When this is run, systemdict is still writable,
% but (almost) everything defined here goes into level2dict.
level2dict begin
% ------ System and user parameters ------ %
% User parameters must obey save/restore, and must also be maintained
% per-context. We implement the former, and some of the latter, here
% with PostScript code. NOTE: our implementation assumes that user
% parameters change only as a result of setuserparams -- that there are
% no user parameters that are ever changed dynamically by the interpreter
% (although the interpreter may adjust the value presented to setuserparams)
%
% There are two types of user parameters: those which are actually
% maintained in the interpreter, and those which exist only at the
% PostScript level. We maintain the current state of both types in
% a read-only local dictionary named userparams, defined in systemdict.
% In a multi-context system, each context has its own copy of this
% dictionary. In addition, there is a constant dictionary named
% psuserparams where each key is the name of a user parameter that exists
% only in PostScript and the value is a procedure to check that the value
% is legal: setuserparams uses this for checking the values.
% setuserparams updates userparams explicitly, in addition to setting
% any user parameters in the interpreter; thus we can use userparams
% to reset those parameters after a restore or a context switch.
% NOTE: the name userparams is known to the interpreter, and in fact
% the interpreter creates the userparams dictionary.
% Check parameters that are managed at the PostScript level.
/.checkparamtype { % <newvalue> <type> .checkparamtype <bool>
exch type eq
} .bind def
/.checksetparams { % <newdict> <opname> <checkdict>
% .checksetparams <newdict>
2 index {
% Stack: newdict opname checkdict key newvalue
3 copy 3 1 roll .knownget {
exec not {
pop pop pop load /typecheck signalerror
} if
dup type /stringtype eq {
dup rcheck not {
pop pop pop load /invalidaccess signalerror
} if
} if
} {
pop
} ifelse pop pop
} forall pop pop
} .bind def % not odef, shouldn't reset stacks
% currentuser/systemparams creates and returns a dictionary in the
% current VM. The easiest way to make this work is to copy any composite
% PostScript-level parameters to global VM. Currently, the only such
% parameters are strings. In fact, we always copy string parameters,
% so that we can be sure the contents won't be changed.
/.copyparam { % <value> .copyparam <value'>
dup type /stringtype eq {
.currentglobal true .setglobal
1 index length string exch .setglobal
copy readonly
} if
} .bind def
% Some user parameters are managed entirely at the PostScript level.
% We take care of that here.
systemdict begin
/psuserparams 40 dict def
/getuserparam { % <name> getuserparam <value>
/userparams .systemvar 1 index get exch pop
} odef
% Fill in userparams (created by the interpreter) with current values.
mark .currentuserparams
counttomark 2 idiv {
userparams 3 1 roll put
} repeat pop
/.definepsuserparam { % <name> <value> .definepsuserparam -
psuserparams 3 copy pop
type cvlit /.checkparamtype cvx 2 packedarray cvx put
userparams 3 1 roll put
} .bind def
end
/currentuserparams { % - currentuserparams <dict>
/userparams .systemvar dup length dict .copydict
} odef
/setuserparams { % <dict> setuserparams -
% Check that we will be able to set the PostScript-level
% user parameters.
/setuserparams /psuserparams .systemvar .checksetparams
% Set the C-level user params. If this succeeds, we know that
% the password check succeeded.
dup .setuserparams
% Now set the PostScript-level params.
% The interpreter may have adjusted the values of some of the
% parameters, so we have to read them back.
dup {
/userparams .systemvar 2 index known {
psuserparams 2 index known not {
pop dup .getuserparam
} if
.copyparam
/userparams .systemvar 3 1 roll .forceput % userparams is read-only
} {
pop pop
} ifelse
} forall
% A context switch might have occurred during the above loop,
% causing the interpreter-level parameters to be reset.
% Set them again to the new values. From here on, we are safe,
% since a context switch will consult userparams.
.setuserparams
} .bind odef
% Initialize user parameters managed here.
/JobName () .definepsuserparam
% Restore must restore the user parameters.
% (Since userparams is in local VM, save takes care of saving them.)
/restore { % <save> restore -
//restore /userparams .systemvar .setuserparams
} .bind odef
% The pssystemparams dictionary holds some system parameters that
% are managed entirely at the PostScript level.
systemdict begin
currentdict /pssystemparams known not {
/pssystemparams 40 dict readonly def
} if
/getsystemparam { % <name> getsystemparam <value>
//pssystemparams 1 index .knownget { exch pop } { .getsystemparam } ifelse
} odef
end
/currentsystemparams { % - currentsystemparams <dict>
mark .currentsystemparams //pssystemparams { } forall .dicttomark
} odef
/setsystemparams { % <dict> setsystemparams -
% Check that we will be able to set the PostScript-level
% system parameters.
/setsystemparams //pssystemparams mark exch {
type cvlit /.checkparamtype cvx 2 packedarray cvx
} forall .dicttomark .checksetparams
% Set the C-level system params. If this succeeds, we know that
% the password check succeeded.
dup .setsystemparams
% Now set the PostScript-level params. We must copy local strings
% into global VM.
dup
{ //pssystemparams 2 index known
{ % Stack: key newvalue
.copyparam
//pssystemparams 3 1 roll .forceput % pssystemparams is read-only
}
{ pop pop
}
ifelse
}
forall pop
} .bind odef
% Initialize the passwords.
% NOTE: the names StartJobPassword and SystemParamsPassword are known to
% the interpreter, and must be bound to noaccess strings.
% The length of these strings must be max_password (iutil2.h) + 1.
/StartJobPassword 65 string noaccess def
/SystemParamsPassword 65 string noaccess def
% Redefine cache parameter setting to interact properly with userparams.
/setcachelimit {
mark /MaxFontItem 2 index .dicttomark setuserparams pop
} .bind odef
/setcacheparams {
% The MaxFontCache parameter is a system parameter, which we might
% not be able to set. Fortunately, this doesn't matter, because
% system parameters don't have to be synchronized between this code
% and the VM.
counttomark 1 add copy setcacheparams
currentcacheparams % mark size lower upper
3 -1 roll pop
/MinFontCompress 3 1 roll
/MaxFontItem exch
.dicttomark setuserparams
cleartomark
} .bind odef
% Add bogus user and system parameters to satisfy badly written PostScript
% programs that incorrectly assume the existence of all the parameters
% listed in Appendix C of the Red Book. Note that some of these may become
% real parameters later: code near the end of gs_init.ps takes care of
% removing any such parameters from ps{user,system}params.
% psuserparams
/MaxFormItem 100000 .definepsuserparam
/MaxPatternItem 20000 .definepsuserparam
/MaxScreenItem 48000 .definepsuserparam
/MaxUPathItem 5000 .definepsuserparam
pssystemparams begin
/CurDisplayList 0 .forcedef
/CurFormCache 0 .forcedef
/CurOutlineCache 0 .forcedef
/CurPatternCache 0 .forcedef
/CurUPathCache 0 .forcedef
/CurScreenStorage 0 .forcedef
/CurSourceList 0 .forcedef
/DoPrintErrors false .forcedef
/MaxDisplayList 140000 .forcedef
/MaxFormCache 100000 .forcedef
/MaxOutlineCache 65000 .forcedef
/MaxPatternCache 100000 .forcedef
/MaxUPathCache 300000 .forcedef
/MaxScreenStorage 84000 .forcedef
/MaxSourceList 25000 .forcedef
/RamSize 4194304 .forcedef
end
% Define the procedures for handling comment scanning. The names
% %ProcessComment and %ProcessDSCComment are known to the interpreter.
% These procedures take the file and comment string and file as operands.
/.checkprocesscomment {
dup null eq {
pop true
} {
dup xcheck {
type dup /arraytype eq exch /packedarraytype eq or
} {
pop false
} ifelse
} ifelse
} .bind def
/ProcessComment null .definepsuserparam
psuserparams /ProcessComment {.checkprocesscomment} put
(%ProcessComment) cvn {
/ProcessComment getuserparam
dup null eq { pop pop pop } { exec } ifelse
} bind def
/ProcessDSCComment null .definepsuserparam
psuserparams /ProcessDSCComment {.checkprocesscomment} put
(%ProcessDSCComment) cvn {
/ProcessDSCComment getuserparam
dup null eq { pop pop pop } { exec } ifelse
} bind def
% ------ Miscellaneous ------ %
(<<) cvn % - << -mark-
/mark load def
(>>) cvn % -mark- <key1> <value1> ... >> <dict>
/.dicttomark load def
/languagelevel 2 def
% When running in Level 2 mode, this interpreter is supposed to be
% compatible with Adobe version 2017.
/version (2017) readonly def
% If binary tokens are supported by this interpreter,
% set an appropriate default binary object format.
/setobjectformat where
{ pop
/RealFormat getsystemparam (IEEE) eq { 1 } { 3 } ifelse
/ByteOrder getsystemparam { 1 add } if
setobjectformat
} if
% Aldus Freehand versions 2.x check for the presence of the
% setcolor operator, and if it is missing, substitute a procedure.
% Unfortunately, the procedure takes different parameters from
% the operator. As a result, files produced by this application
% cause an error if the setcolor operator is actually defined
% and 'bind' is ever used. Aldus fixed this bug in Freehand 3.0,
% but there are a lot of files created by the older versions
% still floating around. Therefore, at Adobe's suggestion,
% we implement the following dreadful hack in the 'where' operator:
% If the key is /setcolor, and
% there is a dictionary named FreeHandDict, and
% currentdict is that dictionary,
% then "where" consults only that dictionary and not any other
% dictionaries on the dictionary stack.
.wheredict /setcolor {
/FreeHandDict .where {
/FreeHandDict get currentdict eq {
pop currentdict /setcolor known { currentdict true } { false } ifelse
} {
.where
} ifelse
} {
.where
} ifelse
} bind put
% ------ Virtual memory ------ %
/currentglobal % - currentglobal <bool>
/currentshared load def
/gcheck % <obj> gcheck <bool>
/scheck load def
/setglobal % <bool> setglobal -
/setshared load def
% We can make the global dictionaries very small, because they auto-expand.
/globaldict currentdict /shareddict .knownget not { 4 dict } if def
/GlobalFontDirectory SharedFontDirectory def
% VMReclaim and VMThreshold are user parameters.
/setvmthreshold { % <int> setvmthreshold -
mark /VMThreshold 2 index .dicttomark setuserparams pop
} odef
/vmreclaim { % <int> vmreclaim -
dup 0 gt {
.vmreclaim
} {
mark /VMReclaim 2 index .dicttomark setuserparams pop
} ifelse
} odef
-1 setvmthreshold
% ------ IODevices ------ %
/.getdevparams where {
pop /currentdevparams { % <iodevice> currentdevparams <dict>
.getdevparams .dicttomark
} odef
} if
/.putdevparams where {
pop /setdevparams { % <iodevice> <dict> setdevparams -
mark 1 index { } forall counttomark 2 add index
.putdevparams pop pop
} odef
} if
% ------ Job control ------ %
serverdict begin
% We could protect the job information better, but we aren't attempting
% (currently) to protect ourselves against maliciousness.
/.jobsave null def % top-level save object
/.jobsavelevel 0 def % save depth of job (0 if .jobsave is null,
% 1 otherwise)
/.adminjob true def % status of current unencapsulated job
end % serverdict
% Because there may be objects on the e-stack created since the job save,
% we have to clear the e-stack before doing the end-of-job restore.
% We do this by executing a 2 .stop, which is caught by the 2 .stopped
% in .runexec; we leave on the o-stack a procedure to execute aftewards.
%
%**************** The definition of startjob is not complete yet, since
% it doesn't reset stdin/stdout.
/.startnewjob { % <exit_bool> <password_level>
% .startnewjob -
serverdict /.jobsave get dup null eq { pop } { restore } ifelse
exch {
% Unencapsulated job
serverdict /.jobsave null put
serverdict /.jobsavelevel 0 put
serverdict /.adminjob 3 -1 roll 1 gt put
% The Adobe documentation doesn't say what happens to the
% graphics state stack in this case, but an experiment
% produced results suggesting that a grestoreall occurs.
grestoreall
} {
% Encapsulated job
pop
serverdict /.jobsave save put
serverdict /.jobsavelevel 1 put
} ifelse
% Reset the interpreter state.
clear cleardictstack
initgraphics
false setglobal
} bind def
/.startjob { % <exit_bool> <password> <finish_proc>
% .startjob <ok_bool>
vmstatus pop pop serverdict /.jobsavelevel get eq
2 index .checkpassword 0 gt and {
exch .checkpassword exch count 3 roll count 3 sub { pop } repeat
cleardictstack
% Reset the e-stack back to the 2 .stopped in .runexec,
% passing the finish_proc to be executed afterwards.
2 .stop
} { % Password check failed
pop pop pop false
} ifelse
} odef
/startjob { % <exit_bool> <password> startjob <ok_bool>
% This is a hack. We really need some way to indicate explicitly
% to the interpreter that we are under control of a job server.
.userdict /quit /stop load put
{ .startnewjob true } .startjob
} odef
systemdict begin
/quit { % - quit -
//systemdict begin serverdict /.jobsave get null eq
{ end //quit }
{ /quit load /invalidaccess /signalerror load end exec }
ifelse
} bind odef
end
% We would like to define exitserver as a procedure, using the code
% that the Red Book says is equivalent to it. However, since startjob
% resets the exec stack, we can't do this, because control would never
% proceed past the call on startjob if the exitserver is successful.
% Instead, we need to construct exitserver out of pieces of startjob.
serverdict begin
/exitserver { % <password> exitserver -
true exch { .startnewjob } .startjob not {
/exitserver /invalidaccess signalerror
} if
} bind def
end % serverdict
% ------ Compatibility ------ %
% In Level 2 mode, the following replace the definitions that gs_statd.ps
% installs in statusdict and serverdict.
% Note that statusdict must be allocated in local VM.
% We don't bother with many of these yet.
/.dict1 { exch mark 3 1 roll .dicttomark } bind def
currentglobal false setglobal 25 dict exch setglobal begin
currentsystemparams
% The following do not depend on the presence of setpagedevice.
/buildtime 1 index /BuildTime get def
/byteorder 1 index /ByteOrder get def
/checkpassword { .checkpassword 0 gt } bind def
dup /DoStartPage known
{ /dostartpage { /DoStartPage getsystemparam } bind def
/setdostartpage { /DoStartPage .dict1 setsystemparams } bind def
} if
dup /StartupMode known
{ /dosysstart { /StartupMode getsystemparam 0 ne } bind def
/setdosysstart { { 1 } { 0 } ifelse /StartupMode .dict1 setsystemparams } bind def
} if
%****** Setting jobname is supposed to set userparams.JobName, too.
/jobname { /JobName getuserparam } bind def
/jobtimeout { /JobTimeout getuserparam } bind def
/ramsize { /RamSize getsystemparam } bind def
/realformat 1 index /RealFormat get def
dup /PrinterName known
{ /setprintername { /PrinterName .dict1 setsystemparams } bind def
} if
/printername
{ currentsystemparams /PrinterName .knownget not { () } if exch copy
} bind def
currentuserparams /WaitTimeout known
{ /waittimeout { /WaitTimeout getuserparam } bind def
} if
% The following do require setpagedevice.
/.setpagedevice where { pop } { (%END PAGEDEVICE) .skipeof } ifelse
/defaulttimeouts
{ currentsystemparams dup
/JobTimeout .knownget not { 0 } if
exch /WaitTimeout .knownget not { 0 } if
currentpagedevice /ManualFeedTimeout .knownget not { 0 } if
} bind def
/margins
{ currentpagedevice /Margins .knownget { exch } { [0 0] } ifelse
} bind def
/pagemargin
{ currentpagedevice /PageOffset .knownget { 0 get } { 0 } ifelse
} bind def
/pageparams
{ currentpagedevice
dup /Orientation .knownget { 1 and ORIENT1 { 1 xor } if } { 0 } ifelse exch
dup /PageSize get aload pop 3 index 0 ne { exch } if 3 2 roll
/PageOffset .knownget { 0 get } { 0 } ifelse 4 -1 roll
} bind def
/setdefaulttimeouts
{ exch mark /ManualFeedTimeout 3 -1 roll
/Policies mark /ManualFeedTimeout 1 .dicttomark
.dicttomark setpagedevice
/WaitTimeout exch mark /JobTimeout 5 2 roll .dicttomark setsystemparams
} bind def
/.setpagesize { 2 array astore /PageSize .dict1 setpagedevice } bind def
/setduplexmode { /Duplex .dict1 setpagedevice } bind def
/setmargins
{ exch 2 array astore /Margins .dict1 setpagedevice
} bind def
/setpagemargin { 0 2 array astore /PageOffset .dict1 setpagedevice } bind def
/setpageparams
{ mark /PageSize 6 -2 roll
4 index 1 and ORIENT1 { 1 } { 0 } ifelse ne { exch } if 2 array astore
/Orientation 5 -1 roll ORIENT1 { 1 xor } if
/PageOffset counttomark 2 add -1 roll 0 2 array astore
.dicttomark setpagedevice
} bind def
/setresolution
{ dup 2 array astore /HWResolution .dict1 setpagedevice
} bind def
%END PAGEDEVICE
% The following are not implemented yet.
%manualfeed
%manualfeedtimeout
%pagecount
%pagestackorder
%setpagestackorder
pop % currentsystemparams
% Flag the current dictionary so it will be swapped when we
% change language levels. (See zmisc2.c for more information.)
/statusdict currentdict def
currentdict end
/statusdict exch .forcedef % statusdict is local, systemdict is global
% The following compatibility operators are in systemdict. They are
% defined here, rather than in gs_init.ps, because they require the
% resource machinery.
/devforall { % <pattern> <proc> <scratch> devforall -
exch {
1 index currentdevparams
/Type .knownget { /FileSystem eq } { false } ifelse
{ exec } { pop pop } ifelse
} /exec load 3 packedarray cvx exch
(*) 3 1 roll ppstack flush /IODevice resourceforall
} odef
/devstatus { % <(%disk*%)> devstatus <searchable> <writable>
% <hasNames> <mounted> <removable> <searchOrder>
% <freePages> <size> true
% <string> devstatus false
dup length 5 ge {
dup 0 5 getinterval (%disk) eq {
dup /IODevice resourcestatus {
pop pop dup currentdevparams
dup /Searchable get
exch dup /Writable get
exch dup /HasNames get
exch dup /Mounted get
exch dup /Removable get
exch dup /SearchOrder get
exch dup /Free get
exch /LogicalSize get
9 -1 roll pop true
} {
pop false
} ifelse
} {
pop false
} ifelse
} {
pop false
} ifelse
} odef
% ------ Color spaces ------ %
% Attempt to convert a tint transformation procedure to a Function.
% The current color space defines the number of output values.
/.converttinttransform { % [.. .. .. proc ] <m>
% .converttinttransform [.. .. .. proc']
.currentglobal 2 index gcheck .setglobal
4 dict
dup /FunctionType 4 put
dup /Function 5 index 3 get put
% Stack: orig m global func
dup /Domain [ 6 -1 roll {0 1} repeat ] put
dup /Range [
mark currentcolor counttomark
dup 2 add 1 roll cleartomark % # of components in alternate space
{0 1} repeat ] put
{ .buildfunction } .internalstopped {
pop .setglobal
} {
% Stack: orig global func
2 index 4 array copy dup 3 4 -1 roll put
exch .setglobal exch pop
} ifelse
} bind def
% Define the setcolorspace procedures:
% <colorspace> proc <colorspace'|null>
% We have to define the dictionary first, so it can be bound into the
% implementation procedure, but we can't populate it until the procedure
% has been defined, so that the procedure can get bound into recursive calls.
/colorspacedict 20 dict def
/.devcs [
/DeviceGray /DeviceRGB /DeviceCMYK /DevicePixel
] readonly def
/currentcolorspace { % - currentcolorspace <array>
.currentcolorspace dup type /integertype eq {
//.devcs exch 1 getinterval
} if
} odef
currentdict /.devcs .undef
/setcolorspace { % <name|array> setcolorspace -
dup dup dup type /nametype ne { 0 get } if
//colorspacedict exch get exec
dup null eq { pop } { .setcolorspace } ifelse pop
} odef
colorspacedict
dup /DeviceGray { pop 0 setgray null } bind put
dup /DeviceRGB { pop 0 0 0 setrgbcolor null } bind put
/setcmykcolor where
{ pop dup /DeviceCMYK { pop 0 0 0 1 setcmykcolor null } bind put
} if
/.setcieaspace where
{ pop dup /CIEBasedA { NOCIE { pop 0 setgray null } { dup 1 get .setcieaspace } ifelse } bind put
} if
/.setcieabcspace where
{ pop dup /CIEBasedABC { NOCIE { pop 0 0 0 setrgbcolor null } { dup 1 get .setcieabcspace } ifelse } bind put
} if
/.setciedefspace where
{ pop dup /CIEBasedDEF { NOCIE { pop 0 0 0 setrgbcolor null } { dup 1 get .setciedefspace } ifelse } bind put
} if
/.setciedefgspace where
{ pop dup /CIEBasedDEFG { NOCIE { pop 0 0 0 1 setcmykcolor null } { dup 1 get .setciedefgspace } ifelse } bind put
} if
/.setseparationspace where
{ pop dup /Separation { dup 2 get setcolorspace dup 1 .converttinttransform .setseparationspace } bind put
} if
/.setindexedspace where
{ pop dup /Indexed { dup 1 get setcolorspace dup .setindexedspace } bind put
} if
/.nullpatternspace [/Pattern] readonly def
/.setpatternspace where
{ pop dup /Pattern
{ dup type /nametype eq { pop //.nullpatternspace } if
dup length 1 gt { dup 1 get setcolorspace } if
dup .setpatternspace
} bind put
} if
% If DeviceN space is included, gs_ll3.ps registers it.
/.setdevicepixelspace where
{ pop dup /DevicePixel { dup .setdevicepixelspace } bind put
} if
currentdict /.nullpatternspace .undef
pop
% ------ CIE color rendering ------ %
% Define findcolorrendering and a default ColorRendering ProcSet.
/findcolorrendering { % <intentname> findcolorrendering
% <crdname> <found>
/ColorRendering /ProcSet findresource
1 index .namestring (.) concatstrings
1 index /GetPageDeviceName get exec .namestring (.) concatstrings
2 index /GetHalftoneName get exec .namestring
concatstrings concatstrings
dup /ColorRendering resourcestatus {
pop pop exch pop exch pop true
} {
pop /GetSubstituteCRD get exec false
} ifelse
} odef
5 dict dup begin
/GetPageDeviceName { % - GetPageDeviceName <name>
currentpagedevice dup /PageDeviceName .knownget {
exch pop dup null eq { pop /none } if
} {
pop /none
} ifelse
} bind def
/GetHalftoneName { % - GetHalftoneName <name>
currenthalftone /HalftoneName .knownget not { /none } if
} bind def
/GetSubstituteCRD { % <intentname> GetSubstituteCRD <crdname>
pop /DefaultColorRendering
} bind def
end
% The resource machinery hasn't been activated, so just save the ProcSet
% and let .fixresources finish the installation process.
/ColorRendering exch def
% Define setcolorrendering.
/.colorrenderingtypes 5 dict def
/setcolorrendering { % <crd> setcolorrendering -
dup /ColorRenderingType get //.colorrenderingtypes exch get exec
} odef
/.setcolorrendering1 where { pop } { (%END CRD) .skipeof } ifelse
.colorrenderingtypes 1 {
dup .buildcolorrendering1 .setcolorrendering1
} .bind put
% Note: the value 101 in the next line must be the same as the value of
% GX_DEVICE_CRD1_TYPE in gscrdp.h.
.colorrenderingtypes 101 {
dup .builddevicecolorrendering1 .setdevicecolorrendering1
} .bind put
% Initialize the default CIE rendering dictionary.
% The most common CIE files seem to assume the "calibrated RGB color space"
% described on p. 189 of the PostScript Language Reference Manual,
% 2nd Edition; we simply invert this transformation back to RGB.
mark
/ColorRenderingType 1
% We must make RangePQR and RangeLMN large enough so that values computed by
% the assumed encoding MatrixLMN don't get clamped.
/RangePQR [0 0.9505 0 1 0 1.0890] readonly
% This TransformPQR implements a relative colorimetric intent by scaling
% the XYZ values relative to the white and black points.
/TransformPQR
[ { 5 1 roll % p Ws Bs Wd Bd
4 {3 get 5 1 roll} repeat % ws bs wd bd p
3 index sub % ws bs wd bd p-bs
1 index % ws bs wd bd p-bs bd
6 2 roll % p-bs bd ws bs wd bd
sub % p-bs bd ws bs wd-bd
5 1 roll % wd-bd p-bs bd ws bs
sub % wd-bd p-bs bd ws-bs
4 2 roll % bd ws-bs wd-bd p-bs
mul % bd ws-bs (wd-bd)*(p-bs)
exch div add % bd + (wd-bd)*(p-bs)/(ws-bs)
} bind
{ 5 1 roll
4 {4 get 5 1 roll} repeat
3 index sub 1 index 6 2 roll sub 5 1 roll
sub 4 2 roll mul exch div add
} bind
{ 5 1 roll
4 {5 get 5 1 roll} repeat
3 index sub 1 index 6 2 roll sub 5 1 roll
sub 4 2 roll mul exch div add
} bind
] readonly
/RangeLMN [0 0.9505 0 1 0 1.0890] readonly
/MatrixABC
[ 3.24063 -0.96893 0.05571
-1.53721 1.87576 -0.20402
-0.49863 0.04152 1.05700
] readonly
/EncodeABC [ {0 .max 0.45 exp} bind dup dup] readonly
/WhitePoint [0.9505 1 1.0890] readonly
% Some Genoa tests seem to require the presence of BlackPoint.
/BlackPoint [0 0 0] readonly
.dicttomark setcolorrendering
%END CRD
% Initialize a CIEBased color space for sRGB.
/CIEsRGB [ /CIEBasedABC
mark
/DecodeLMN [ {
dup 0.03928 le { 12.92321 div } { 0.055 add 1.055 div 2.4 exp } ifelse
} bind dup dup ] readonly
/MatrixLMN [
0.412457 0.212673 0.019334
0.357576 0.715152 0.119192
0.180437 0.072175 0.950301
] readonly
/WhitePoint [0.9505 1.0 1.0890] readonly
.dicttomark readonly
] readonly def
% ------ Painting ------ %
% A straightforward definition of execform that doesn't actually
% do any caching.
/.execform1 {
% This is a separate operator so that the stacks will be restored
% properly if an error occurs.
dup /Matrix get concat
dup /BBox get aload pop
exch 3 index sub exch 2 index sub rectclip
dup /PaintProc get
1 index /Implementation known not {
1 index dup /Implementation null .forceput readonly pop
} if
exec
} .bind odef % must bind .forceput
/.formtypes 5 dict
dup 1 /.execform1 load put
def
/execform { % <form> execform -
gsave {
dup /FormType get //.formtypes exch get exec
} stopped grestore { stop } if
} odef
/.patterntypes 5 dict
dup 1 /.buildpattern1 load put
def
/makepattern { % <proto_dict> <matrix> makepattern <pattern>
//.patterntypes 2 index /PatternType get get
.currentglobal false .setglobal exch
% Stack: proto matrix global buildproc
3 index dup length 1 add dict .copydict
3 index 3 -1 roll exec 3 -1 roll .setglobal
1 index /Implementation 3 -1 roll put
readonly exch pop exch pop
} odef
/setpattern { % [<comp1> ...] <pattern> setpattern -
currentcolorspace 0 get /Pattern ne {
[ /Pattern currentcolorspace ] setcolorspace
} if setcolor
} odef
% Extend image and imagemask to accept dictionaries.
% We must create .imagetypes and .imagemasktypes outside level2dict,
% and leave some extra space because we're still in Level 1 mode.
systemdict begin
/.imagetypes 5 dict
dup 1 /.image1 load put
def
/.imagemasktypes 5 dict
dup 1 /.imagemask1 load put
def
end
/.image /image load def
/image {
dup type /dicttype eq {
dup /ImageType get //.imagetypes exch get exec
} {
//.image
} ifelse
} odef
currentdict /.image undef
/.imagemask /imagemask load def
/imagemask {
dup type /dicttype eq {
dup /ImageType get //.imagemasktypes exch get exec
} {
//.imagemask
} ifelse
} odef
currentdict /.imagemask undef
end % level2dict